For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as Maretron’s N2KView vessel monitoring system, or Maretron’s DSM150/DSM250 colour graphics displays. Unlike most tank senders that only work with rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks.

In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms. The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200. The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. The TLM150 is another key component of Maretron's N2KView® vessel monitoring and control system.Maretron TLA100 NMEA 2000® Tank Level Adapter This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.

Most importantly, the TLM150 is NMEA 2000® certified so you can view any and all tank levels anywhere on the vessel when using a compatible NMEA 2000® display. The other important optional accessory for the TLM150 is the focus tube to permit use on boats with planing hulls, which is required if the vessel spends a significant amount of time with the bow pitched up. The TLM100 can also be mounted to tanks with threaded tank openings using optional adapters that include both a 1.5 NPT and a 1.25 BSP adapter. The TLM150 is mounted directly to the top of tanks using the industry standard SAE J1810 5-hole mounting pattern. Unlike most tank senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. The TLM150 is capable of sensing gasoline levels in tanks up to 24 (0.61m) in depth (see TLM100 for fluid types other than gasoline in tanks up to 40 or the TLM200 for tanks up to 104). Once the TLM150 calculates and broadcast the fluid level over the NMEA 2000® network, you can observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as Maretron's N2KView® vessel monitoring system, or by Maretron's DSM150/DSM250 color graphics displays. TLA100 NMEA 2000®Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. These holding tank level gauges will work with NMEA 2000. Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. The NMEA holding tank level gauge allows the user to remotely monitor the liquid level in the tank. Maretron TLM150 Gasoline Tank Level Monitor (24

Maretron nmea 2000 tank level monito